.
Direct-Attach Cuvette Holder with Attenuator & Filter Holder
Have the most flexible setup with the combined cuvette holder, attenuator, and filter holder. The attenuation can be set from 0-100%, which can be fixed with a set screw. Use the cuvette holder for any cuvette up to 10x10mm and add half-inch diameter (12-13mm) filters of 1-8mm thick.
The combined direct-attached accessory is available in two versions: the CUV-ATT-DA is used with the AvaLight-DHc (Deuterium and Halogen), and AvaLight-XE (Xenon). The CUV-ATT-DA-HAL-Mini is meant for the AvaLight-HAL-Mini (Halogen) light source.
Do NOT CHANGE OR REMOVE THIS ELEMENT
Direct-Attach Cuvette Holder with Attenuator & Filter Holder
Features
- Full test method compliance
- Equilibrium and non-equilibrium tests
- Automatic set up of test parameters
- Gas or electric ignition
- Automatic heating control and flash detection
- Automatic test results with end of test audible warning
- Centigrade or Fahrenheit temperature displa
- Automatic barometric correction
specifications
| TEMPERATURE RANGE | 5 to 83 °C (-20 °C to 83 °C with optional cryostat 34006-3) |
|---|---|
| HEATING | Cartridge heaters |
| POST TEST COOLING | Fan assisted or circulating liquid / external cryostat |
| POST TEST COOL-DOWN TIME (80°C TO 50°C) | 45 minutes (fan) 3 minutes (external cryostat) |
| IGNITOR | Quick-fit coaxial gas jet / electric hot wire, user selectable (electric hot wire pilot light for gas jet) |
| TEMPERATURE PROBES | Class A platinum resistance thermometers |
| STIRRER SPEED | 30 rpm |
| GAS SUPPLY (GAS JET IGNITOR) | Laboratory gas, 3 kPa (0.44 psi) maximum pressure |
| COOLING SUPPLY | Water (5 °C and above) Water / ethylene glycol 50/50 (below 5 °C) 125 kPa (18 psi) maximum pressure |
| VOLTAGE | 110/120 V or 220/240 V, 50/60 Hz, (switchable) |
| POWER | 600 W |
| SIZE (HXWXD) | 380 x 470 x 340 mm |
| WEIGHT | 13 kg |
| CCCN CODE | Tariff 90268020 |
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
Auto-Abel Flash Point Tester – 34200-2
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for 904 titrando
title
PM-93 Pensky-Martens Flash Point Tester – 35000-0
title
PM-93 Pensky-Martens Flash Point Tester – 35000-0
title
PM-93 Pensky-Martens Flash Point Tester – 35000-0
title
PM-93 Pensky-Martens Flash Point Tester – 35000-0
title
PM-93 Pensky-Martens Flash Point Tester – 35000-0
title
PM-93 Pensky-Martens Flash Point Tester – 35000-0
title
PM-93 Pensky-Martens Flash Point Tester – 35000-0
title
PM-93 Pensky-Martens Flash Point Tester – 35000-0
title
PM-93 Pensky-Martens Flash Point Tester – 35000-0
title
PM-93 Pensky-Martens Flash Point Tester – 35000-0
title
PM-93 Pensky-Martens Flash Point Tester – 35000-0
title
PM-93 Pensky-Martens Flash Point Tester – 35000-0
Seta Multiflash Tag Flash Point Module – 34400-0
The automatic Tag module conforms precisely to national and international…