KV-6 Viscometer Bath
The KV-6 Viscometer Bath is a temperature-controlled bath that maintains the temperature of viscometer tubes, which are used to measure the viscosity of liquid petroleum products.
The instrument consists of an oil-filled temperature-controlled bath. The bath holds up to six standard viscometer tubes, which can be viewed through the glass panel at the front of the instrument. Each aperture has a cover to minimise heat loss when not in use. LEDs illuminate the bath so that you can view the viscometer tubes more easily.
Features
- Accommodates up to 6 viscometer tubes
- Temperature range ambient to 150 °C
- Temperature stability ±0.01 °C up to and including 100 °C , ±0.03 °C above 100 °C
- Digital temperature control with Thermostir Plus
- Oil, silicone fluid or water filled depending on temperature of use
- Double wall glass front panel ensures optimum insulation and reduce heat loss
- Integral safety features
- Clear and precise reading of viscometer tubes
Specifications
Temperature Range | Ambient to 150 °C |
---|---|
Temperature Stability | ±0.01 °C up to and including 100 °C , ±0.03 °C above 100 °C |
Tube Capacity | Up to 6 |
Bath Fluid | Oil, Silicone fluid or water |
Bath Capacity | 50 Litres |
Voltage | 220/240 V, 50/60 Hz |
Power | 2.2 kW |
Size (HXWXD) | Bath outside dimensions 560 x 345 x 435 mm Tank inside dimensions 526 x 273 x 400 mm |
Weight | 33 kg |
CCCN Code | Tariff 90278990 |
POWER | 600 W |
SIZE (HXWXD) | 380 x 470 x 340 mm |
WEIGHT | 13 kg |
CCCN CODE | Tariff 90268020 |
Manufacturers
show DATA — DO NOT CHANGE ID–
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for KV-6 Viscometer Bath
Universal Viscometer Holder – 23150-2
For use with the KV-6 (84200-3) and KV-2 (94710-3) Viscometer baths to hold all regular viscometer tubes. The number of holders required will depend on the bath. The holder can be used with sealing caps (84004-0)
Sealing Cap – 84004-0
For sealing the space around a universal viscometer holder (23150-2). Two required.
Bench Viscometer Stand – 84008
The stand holds viscometer tubes near vertical while being prepared or while draining after use, it is supplied complete with drainage tray.
For use with the KV-6 (84200-2) and KV-2 (94710-3) Viscometer baths.
Digital Stopwatch – 22750-3
Digital stopwatch with LCD display in water resistant case.
Viscometer Tube Plate – 84202-0
7 place Viscometer Tube Plate for 51 mm tube holders.
Viscometer Tube Holder for U – tube Reverse Flow – 23156-0
For use with the KV-6 (84200-3) and KV-2 (94710-3) Viscometer baths to hold 15 mm tube size, for U-tube reverse flow viscometers. The number of holders required will depend on the bath.
Viscometer Tube Holder for Cannon Fenske – 23154-0
For use with the KV-6 (84200-3) and KV-2 (94710-3) Viscometer baths to hold 13 mm tube size, for Cannon-Fenske viscometers. The number of holders required will depend on the bath.
Viscometer Tube Holder for Ubbelohde & Suspended Level – 23152-0
For use with the KV-6 (84200-3) and KV-2 (94710-3) Viscometer baths to hold 11 mm tube size, for Ubbelhode & Suspended Level viscometers. The number of holders required will depend on the bath.
U Tube Reverse Flow Viscometer Testing Kit – 84213-0
The U Tube Reverse Flow Viscometer Testing Kit is used in conjunction with a U Tube Reverse Flow viscometer tube to determine the viscosity of opaque samples. The kit allows you to accurately fill the viscometer tube and control the release of a sample to perform a test.
Ubbelohde Viscometer Testing Kit – 84212-0
The Ubbelohde Viscometer Testing Kit is used in conjunction with an Ubbelohde viscometer tube to determine the viscosity of samples. The kit allows you to accurately fill the viscometer tube and control the release of a sample to perform a test.
Cannon Fenske Routine Viscometer Testing Kit – 84211-0
The Cannon-Fenske Routine Viscometer Testing Kit is used in conjunction with a Cannon-Fenske Routine viscometer tube to determine the viscosity of samples. The kit allows you to accurately fill the viscometer tube and control the release of a sample to perform a test.
Portable Autotransformer (required for 110-120 V operation) – 84204
The Portable Autotransformer allows you to operate 220/240 V Seta-Shell 4-Ball Lubricant Testers (19900-3 & 19800-7) and the KV-6 Viscometer Bath (84200-3) from a 110-120 V supply.
Cannon-Fenske Opaque Viscometer Testing Kit – 84210-0
The Cannon-Fenske Opaque Viscometer Testing Kit is used in conjunction with a Cannon-Fenske Opaque viscometer tube to determine the viscosity of opaque samples. The kit allows you to accurately fill the viscometer tube and control the release of a sample to perform a test.
MTVM – Gas Oil 500 ml – 99851-0
A unique secondary reference material that provides traceable validation of different test parameters from one sample. Certified in general accordance with ISO Guide 35 and ISO 9001, Stanhope-Seta’s verification materials offer readily available support for laboratory accreditation and compliance programmes.
MTVM – Lubricating Oil 500 ml – 99853-2
The Stanhope-Seta Lubricating Oil MTVM is a unique secondary reference material that provides traceable validation of different test parameters, from one sample. Multi Test Verification Materials (MTVM) allow routine monitoring of instrument performance and are particularly useful in training.
MTVM – Fuel Oil 500 ml – 99852-0
A unique secondary reference material that provides traceable validation of different test parameters from one sample. Certified in general accordance with ISO Guide 35 and ISO 9001, Stanhope-Seta’s verification materials offer readily available support for laboratory accreditation and compliance programmes.